De badging

Member Posts : 52 Join date : 2010-05-30 Age : 55

Hi trying to debadge my motor had no probs with the little badges but when tryed to remove the big Opel badge in the centre noticed a hole to locate it has any one done this and is there away around it
cheers for any help
dave

Member Posts : 402 Join date : 2010-05-27 Age : 41

You may be able to fill it mate but not 100% on that

Admin Posts : 1890 Join date : 2009-11-23 Age : 46

i did mine but there wasn't a hole behind it

Group Buyer Posts : 959 Join date : 2009-12-02 Age : 44

done mine but no hole

Member Posts : 54 Join date : 2010-05-26 Age : 46

Mine had no hole what year is yours on m8?

Member Posts : 52 Join date : 2010-05-30 Age : 55

its a 2000 but its a opel so not sure if that different .will have another look tomz but think i will use fibre glass on the inside then filler the outer then use a touch up stick and blend it in
dave

Admin Posts : 1890 Join date : 2009-11-23 Age : 46

that dont sound to bad doing it that way

Member Posts : 130 Join date : 2010-07-31 Age : 43

I spent a couple of years working in a bodyshop and all you can do is get the whole welded up and painted by body shop.

Newbie Posts : 29 Join date : 2010-07-04 Age : 48

i had holes on mine altho loads said they didnt so it's just me and you! as said i just took the inner liner out of the boot and filled from behind with a little sanding and spray on the front it aint that bad,say half hour job or so

Newbie Posts : 37 Join date : 2010-08-25 Age : 40

tbh mate id weld it up and get it done propa, if you fiberglass it it could fall out

Liam

Member Posts : 93 Join date : 2010-05-09 Age : 42

no hole on mine